I'm very happy that you all are performing an incredible good job. Furthermore what you did is very useful for all people as me that have electronics as an hobby.Thank you!!!!!
Everything was great, the manual, the response time, the simplicity of the order, and the
Price. The only thing that I could possible say on a negative note would be that the manual I ordered was more for a service tech. There were a lot of schematic diagrams that didn't help me solve the problem. However I would order again and recommend the web sight to others.
I'd been looking for this manual for awhile. Exactly what I needed - and at an excellant price. Thanks!
Text excerpt from page 6 (click to view)
2. Developer Supply Place a clean sheet of paper on your work surface. 1. Raise the development lock lever and pull out the development unit. Place the unit on a clean sheet of paper. 2. Separate the toner tank from the development unit (2 screws). 3. Pour one bag of developer (1 kg) into the development unit while turning the knob counterclockwise to distribute the developer evenly. 4. Remount the toner tank on the development unit. NOTE: Make sure that there is no gap between the toner tank and the development unit.
Toner Tank
3. Drum Protective Sheet Removal 1. Lower the T/S corona unit lever. 2. Remove the charge corona unit together with the wire cleaner (1 screw). 3. Remove the drum stay (1 knob and 1 screw). The drum knob is reverse threaded. 4. Pull out the drum protective sheet. 5. Reinstall the drum stay and the charge corona unit with the wire cleaner. 6. Raise the T/S corona unit lever. 4. Development Unit Installation 1. When installing the development unit, be sure the development unit rail is properly engaged with the unit guide rail on the copier. (Make sure that the PTL and QL filters are in their original positions.) 2. Shake the toner cartridge well and insert the cartridge. (Refer to the toner supply guide decal on the front right cover.)